Used for tablet to determine the durability at the time of production. The apparatus consists of the following. Transparent plastic Perspex Bath with cover. 1000 cc vessel made from Corning Glass. Bath is fitted with 500 watts heater A.F.H.P. ELECTRIC MOTOR provided with electronic speed regulator which varied from 25 R.P.M. to 250 R.P.M. Approx. A stainless steel stirring Rod fitted with Electric Motor to rotate smooth and without any perceptible wobble in the vessel. A thermostat is provided to maintain water temperature at 37o C only distilled water should be fitted in bath before operation. Complete unit supplied with 3 core wire and plug to work on 220 volt A.C.

(AS per I.P. Third edition 1955)
Used for determination of disintegration of time of tablets. The test equipment consist of 1 liter Beaker tablet can be tested simultaneously through motorized shaft moves up and down direction of 28 to 32 R.P.M. Approx carrying a rigid basket rack assembly. On the upper end of the shaft is fitted a horizontal strip to support cylindrical standard size glass tubes with stainless steel wire gauge bottom. Cylindrical basket moves up and down with standard perforated made of acrylic sheet inside in one liter glass beaker of distilled water. Unit having hot plate rating 65 watts fixed on the top BEAKER. Temperature can be maintained by thermostat in between 35o C to 37o C. complete with 3-core wire and plug to work on 220 volts A.C. (without beaker)

Used for tables determine the durability at the time of production. A transparent plastic Perspex drum 300mm Dia x 35 mm deep with cover approx. also a shaped radit blades which the tablets along with it up to the central height and lets them off while drum is rotation, it tablet rub against each other without any hard impact. The drum rotates at a fix speed to 30 R.P.M. by motor. The rotation period is controlled by electric timer in between 1 to 5 R.P.M. The motor unit is cover steel cabinet and shaft extended on one side which the plastic drum rotate. Tablets are weighed before after the test and the difference is weight for a particular time period indication the rate of abrasion. Complete unit with electric time switch with neon indictor provided on a front panel with 3 core wire and plug to work on 220 volts A.C. s

1. A versatile level operated consisting one plate of putting of capsule by hand
2. Removal of capsule.
3. Filling of powder by dispensing of brush pressing.
4. Fixing of capsule and sealing
5. Injection of capsules

All contact parts are made of Stainless Steel / Brass