Double walled with inner chamber made of S.S. and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to-200C is achieved by hermetically sealed compressor. The gap between the inner and outer wall is filled with high grade mineral glass wool to avoid thermal loss. Body is mounted on a sturdy angle iron frame and mounted on castor wheels. Unit is fitted Solid State Digital Temperature indicator-cum-Controller. Vertical models are supplied with three stainless steel storing shelve.

Most suitable for conducting various experiments on a variety of seed under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without going onto the filed. The double walled unit has inner chamber made of S.S. and outer - chamber of M.S. sheet duly painted. Temperature from 50C to 500C ± 10C is controlled by DIGITAL TEMP. INDICATOR - CONTROLLER .Humidity (NOT ADJUSTABLE) is created in a S.S. water receiver fitted at the bottom to provide 90% to 95% +_ 3% RH Humidity. Supplied complete with 14 adjustable perforated trays. Complete with cord and plug to work on 220/230 V.A.C. supply.

These chamber are most useful for carrying out various experiments to sturdy growth of plants and animals under controlled environmental conditions. Incubation etc. it has outer wall of M.S. sheet duly painted and inner wall made up of heavy gauge S.S. STEEL sheet. The gap between inner and outer wall is filled with high grade glass wool to avoid thermal loss. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber condition. Unit is supplied with three adjustable perforated shelves. Temperature range from 50C to 500 ± 10C is controlled by DUAL SETTING Digital Temperature indicator - cum -controller so as to set two different temperature for Day and Night, Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for artificial day light, and the cyclic illumination conditions are regulated by automatic. 0-24 hrs timer. When all the tubes are ON temperature from 150C to 500C ± 10C can be obtained. Humidity from ambient to 95% ± 3% RH is controlled by a controller at temperature Ranging from ambient to 500C and the same is achieved by means of injecting steam. Arrangements for increasing the humidity is provided and not for decreasing.

It is a double bath with inner chamber made of stainless steel and outer wall made of M.S. sheet duly enamel painted. The gap between outer and inner wall is filled with special glass wool insulation. The concentric can be removed to accommodate containers of various sizes. Temperature from ambient to 1000 ± 10C is controlled by "IMPORTED THERMOSTAT
a) 300 x 250 x 100 mm(6 holes of 75 mm dia)       8 ltrs
b) 355 x 405 x 100 mm (12 holes of 75 mm dia)       14 ltrs.

These units are double walled with inner chamber made up of S.S. sheet (SS-304 grade) and outside of M.S. Duly enamel painted. The gap between the walls is filled with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with (a) THERMOSTATICALLY CONTROLLED. Temperature from ambient to 1000C is controlled by hydraulic capillary type "EGO"/ JUMO" GERMAN thermostat with an accuracy of ± 0.50C. Supplied complete with 220/230 volts A.C. Supply. The unit can be supplied with or without stirring arrangement. The stirring arrangement consists of a FHP motor with S.S. stirring shaft and a speed regulator.

Double walled chamber has inner made up of thick stainless steel (SS-304 grade) and outer wall is of thick PCRC sheet duly enameled painted. A glass window is provided on the front side for an easy inside view. A high speed stirrer with a FHP motor is fitted to the unit for continuous stirring and thus maintaining a uniform temperature throughout. A speed regulator is provided on the front panel to control speed of the stirrer. The heating mechanism comprises of set of heaters pertaining to faster and slower heating. Temperature is controlled by digital temp. Controller-cum-indicator from ambient to 1000C. To work on 220/230 volts. A.C. Supply.