Fabricated out of thick wooden board these are designed so as to throw-out all toxic / harmful / vapours thus protecting costly instruments and the person working in the lab. Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acid alkali resistant tiles and a small wash basin with connection provide for inlet and outer of water. The front door moves vertically up and down with concealed counter balanced weight. The unit is fitted with florescent light and a gas cock for gas/ air supply. The space under the work station can be provided with storage compartments for storage purpose at extra cost (See Optional Accessories). The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts A.C.supply.

Made out of tubular M.S. pipes / tubular aluminium pipe duly painted for longer life. Each rack of size 48"x21" (Depth) is covered with thick unbreakable plexiglass. Distance between each rack is 15" Each Rack is fitted with 4 fluorescent tubes, 4 bulbs and one U.V. Germicidal light. Copper choke are fitted on a separate wooden plank fitted with caster wheels at its base, so that the chokes can be placed outside the Tissue culture room, if desired, so as to avoid head dissipation inside the air conditioned room, which is a must

It instantly converts lipuid formalin/disinfecting liquid, into the true aerosol particles. Due to high aerodynamic stability the droplets remain suspended for longer duration and thus ensure 100% sterile germ free and zero bacteria environment. A single unit can sterilize 250cu. Meters.(9000cu Ft.) in just 30-60 minutes. To work on 220/230 V.A.C.

Based on the rotating disc-splash plate principal. It produce only super fine particles of micron size, which become part of the atmosphere, thereby reaching every corner of the room, resulting in uniform humidity. Due to the upward thrust imparted to the micron size water droplets, by high speed motorized Unit, they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing upto 3 liters of water in an hour at full evaporation in the dries possible ambient condition. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume upto 40 cu. Mtrs. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure fumigation. To work on 220/230 volts A.C. supply.

Dehumidifiers are water condensing type, base on "Refrigeration Cycle" to avoid use of expensive chemicals required for dessicent type models. The unit is self standing and is mounted on a study angle iron frame, fitted with caster wheels. Dehumidifier removes excess moisture from the atmosphere and it fitted with hermetically sealed compressor. Heat exchanger and water condensed coils are made of copper. Water collection tank is provided below the unit to collect condensate water. Humidity is controlled by automatic HUMIDISTATE incorporated in the unit, upto 30% +_ 3% RH, depending upon. The ambient conditions. With the dehumidifier heat load in the room. Suitable to work on 220/230 volts A.C. Supply. CAPACITY: 15 Tonne

Housed in a super structure steel frame it is mounted on swivel casters. Complete with Perspex see through lid, gasket and control instruments i.e. Microprocessor Based Digital Temperature Controller. For measurement of Temp. and electronic vacuum indicator. The unit made out of hermetically sealed compressor and with 100 liters / min direct motor drive rotary vane type vacuum pump of double stage with air ballast having ultimate vacuum of less than 50 microns in the system and 10 microns on pump head. Condenser trap. All non magnetic stainless steel fabricated, argon welded, dished bottom for complete effluent removal. Refrigeration coils made of copper bonded to outside of condenser heavily insulated. Temp. up to (-)400C at ambient temperature of 200 C is maintained through a MICROPROCESSOR BASED DIGITAL TEMPERATURE INDICATURE. Vacuum Drum has 6 or 12 port manifold (main drying chamber) made of stainless steel non magnetic grade with Perspex top cover. (CFC FREEAND PUFF INSULATED)
(a) Capacity 3.25 liters approximately (for 6 tests)
(b) Capacity 5.25 liters approximately (for 12 tests)