(As per ISI Specification)
It is used for sterilization under saturated steam pressure at any selected point between 10 to 20 p.s.i. (adjustable). These are double walled units with inner chamber (Boiler) made of 18 S.W.G. stainless steel and outer chamber is covered with S.S. Lid is tightened by wing nuts / radial locking system (AS ORDERED). Fitted with neoprene rubber gasket, all systems are hydraulically tested upto 40 p.s.i. as a safety measure. All autoclaves are fitted with saandrad accessories such as water level indicator, pressure gauge, steam release cock, spring loaded safety valve and heating element. Supplied complete with S.S basket, cord and plug to work on 220/230 volts A.C. Supply.

This is a double walled unit mounted horizontal on a sturdy, heavy mild steel tubular stand duly painted. Pressure is adjustable from 10 to 20 psi. fitted with pressure gauge, safety valve and steam release valve. Available with boiler. For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided. Hydraulically tested upto 40 psi. Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation. Both inner chamber made of S.S. Fitted with a Digital Temperature Indicator to indicate temperature. Automatic Pressure Control Switch and Automatic Low Water Level Cut-off devices. Lid is made of S.S. Plate provided with radial locking system. Without steam jacket.

Most useful for sterilizing the loaded material under a steam pressure of 10 to 20 p.s.i. (adjustable). It has inner chamber, steam jacket and outer wall made of S.S. duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimse the temperature loss. All sterilizers are hydraulically tested upto 40 p.s.i. The lid is made of thick Stainless Steel / Gun Metal and closed by Radial type closing arrangement. Fitted with a gasket made up of neoprene rubber, safety valve, water level indicator, steam release valve, pressure gauge and S.S basket. Supplied complete with cord and plug to work on 220/230 volts A.C. supply. Fitted with vacuum breaker as a safety device. As per ISI specification.

Inner chamber is made up of thick steel of 304/ 316 quality and jacket is made out of rolled steel. Single door made of rolled steel lined with S.S. sheet has radial locking system. All units are hydraulically tested Up to 40 psi. The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimizer thermal losses. Boiler is made of thick S.S. sheet and is located under the sterilizer. It is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves. Unit is fitted with low water cut-off device and automatic pressure control device. All "ICON" rectangular sterilizers are fitted with SELF LOCKING SAFETY DOOR device. The door cannot be opened when chamber is under pressure. Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired. Fitted with a dial thermometer and automatic vacuum breaker. To work on 440 volts, 3 phase, A.C.supply.