Double walled unit with inside made of S.S. and outside of M.S. sheet duly enamel painted. The gap between the two walls is filled with high grade glass wool to minimise thermal loss. Temperature range from 500C to 2500C ± 20C, controlled by "IMPORTED THERMOSTAT" hydraulic capillary type thermostat. A variable speed stirring arrangement is fitted to the unit for marinating temperature with cord and plug to work on 220/230 volts. A.C. Supply.

Mounted on a sturdy angle iron frame the inner chamber is made of thick S.S. and outer of mild steel duly enamel painted. The gap between the inner and outer wall is filled with high grade glass wool is order to prevent any loss of temperature. Fitted with ISI marked compressor for effective cooling. Heating is brought about by immersion typer Heating Elements. Temperature range from 50C is controlled by mercury contact thermometer with an accuracy of ± 0.50C A high speed stirrer is fitted to maintain temperature uniformity. The lid of bath is insulated double walled fixed with hinges and is provided with locking arrangements.
Inner chamber size : 500 x 250 x 250 mm

It is a double walled unit inside made of thick S.S. sheet and outer of M.S. sheet duly enamel painted. The paramedical lid made of S.S. prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by "IMPORTED THERMOSTATE" hydraulic type with an accuracy of ± 0.50C. The bath has an oscillating. Tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25ml or 50ml or 100ml or 250ml or 500ml or 1000ml. As per ordered by the users. (kindly the capacity of the flasks while ordering). Supplied complete with one shaking tray. Paramedical cover, L-shaped thermometer cord an plug, to work on 220/230 volts A.C. Supply. Available with heating arrangement only (having temperature range from ambient to 1000C) or with both heating and cooling arrangements (having temperature range from 50C to 1000C)

Designed so as to meet the requirement of US Federal Standard 209 B (BS 5295) providing free air to meet class 100 (class conditions) the cabinets are fabricated out of thick board duly sunmica clad. Interior surface are epoxy painted for its longer life. The work table is made of thick board which is sunmica clad at top. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air). Filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air borne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI Marked motor of ¼ H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. Height of the working table provides comfortable "SIT DOWN" working position for the operator. To work on 220/230 volts A.C. supply. Supplied complete with sunmica table top. HEPA filters, pre-filter and fluorescent illumination. Transparent front door, static pressure manometer, Built in Germicidal light, cock for gas, air or vacuum line. Etc.

Detail as per DE-137 but with laminar air following down vertically from top towards of work table.

The cabinets are fabricated out of thick board duly sunmica clad. Interior surface are epoxy painted for its longer life. The work table is made of heavy gauge S.S. sheet and is fitted with U.V. Germicidal Light static pressure manometer, exhaust system (suitable for 6 feet duct) and virus burn out unit. Side panels are made out of thick transparent plexis glass duly framed. The unit is fitted with pre-filter and HEPA filter. Air is drawn though pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency retaining all air borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced motor of ¼ H.P.capacity. Operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. The height of the working table provides a comfortable "SIT DOWN" working position for the operator. In addition to the above features of a standard vertical laminar flow bench the "ICON" Bio-safe cabinets have arrangements for re-circulating a part of the air thus creating highest level of clean air. The unit is also convertible to the conventional vertical laminar flow bench with downward air flow by lifting the sliding front door upwards. Air is sucked through the pre-filter and the excess air flow by lifting the sliding front door upwards Air is sucked through the pre-filter and the excess air is thrown out from the top, through a HEPA filter of size 1" x 1" x 6". Supplied with glove ports and gauntlets. HEPA filter, pre filter U.V. light and fluorescent light.