Specification
Sturdy and durable Body with proper insulation to
withstand the impact of atmospheric condition.
The Control
By pretested contact thermo controls/electronic
digital display controls, of temperature and humidity through very sensitive
sensor.
Ventilation
Through well balanced multi bladed motorized power
impeller fans to such a precise that embryo development is in perfect stage.
Humidity
Controlled through sensors in tune with solenoid
valve to give reliable accuracy in humidity control.
Heating
Through sealed type air heaters for normal heating
and temperature boosting in cold weather and high Attitudes.
Cooling System
Achieved through strategically positioned copper
pipe cooling coils.
Exhaust Ventilation
Automatic exhaust provided for cooling system.
Automatic Truning Control
Designed for every hourly turning of eggs
automatically and also provided with electrically controlled Rotation
Recorder. Operatable by precise reduction gear box driven by ½ H.P.
Motor.
Setting Trays
Of high quality specially designed setting trys of
plastic to avoid damage to eggs and produce extra hatchabity.
Alarm Bell
Caution Bell in case of non-confirming atmospheric
condition inside the incubator.
Hatching Trays
Of plastic moulded, durable and stackable. Designed
for proper ventilation, handling and easy to clean.
Control Panel
Control panels fitted with sensors, are provided on
front for quick accessibility and machine operation
Electric Power
The system is operatable on 220-250 V, Single phase
supply.
Electric Power
The system is operatable on 220-250 V, Single phase
supply.
Electrical Requirements
Fan Motor-1/3 H.P., Turning Motor-1/2 H.P. Heaters-4
Nos x 500 watts each compartment. Initial load - 3 KW per compartment of
setter. Working load-1-2KW per compartment of setter.
 |
| Capacity |
500 Eggs |
1000Eggs |
2000Eggs |
5000Eggs |
1000Eggs |
|
|
B.O.D. Incubator(Low Temperature)"altis"(Super Deluxe Digital
Model)
|
Most versatile for Biochemical Oxygen
Demand determinations. Castor wheel mounted cabinet is double walled with
inner chamber of S.S. and outer wall of M.S. sheet duly painted. The gap of
75 mm between the outer and the inner wall is filled with special grade
glass wool to prevent thermal losses. Triple walled back of unit is fitted
with two air circulation fans for maintaining temperature uniformity
throughout the chamber. Full view inner glass door permits inspection of
specimens, without disturbing the same. Lock and key arrangement is provided
in the double walled outer door. Unit is fitted with door operated
illumination lamp inside the chamber. Refrigeration unit is formed by ISI
marked compressor. The front panel is provided with separate indicator lamps
for main, heating and incoming voltage. Supplied complete with 3 shelves,
cord and plug to work on 220/230/VA.C. supply Temperature from 50C to 500C
is controlled by SOLID STATE EELECTRONIC DIGITAL TEMPERATURE
INDICATOR-CUM-CONTROLLER , with an accuracy of ± 0.50C.
|
| Super Deluxe Digital Model |
Capacity |
Volume |
| (a) 455 x 610 x 410 mm |
4.0 Cu. Ft |
113 ltrs. |
| (b) 505 x 830 x 415 mm |
6.1 Cu. Ft |
173 ltrs. |
| (c) 570 x 875 x 550 mm |
10 Cu. Ft |
282 ltrs. |
| (d) 650 x 900 x 550 mm |
12 Cu. Ft |
342 ltrs. |
| (e) 700 x 900 x 650 mm |
15 Cu. Ft |
490 ltrs. |
|
|
Optional Accessories
(a) Micro processor Based PID controller with audio
visual alarm system-
(b) Humidity system can also be provided in all model and size 55 to 95% +
_3% RH
|
| Capacity |
4cu. Ft. |
6.1 cu. Ft. |
10 cu. Ft. |
12 cu. Ft. |
15cu. Ft. |
|
|
(c)Light system by interior illumination with three
fluorescent tube 60 cm long (20 watts) Placed vertically along with back
wall. Temp. can be obtained 100C to 500C when all tubes are on.
(d) Timer 0-24 hours for regulating cycle's illumination condition fixed on
top of the chamber
(e) Arrangement for incubation for Co2 Air Mixture
(f) Electronic Digital Temperature and humidity controller combined
(g) Automatic voltage Stabilizer 3 KVA (Triple Relay)
(h) Digital Timer
