Home »
Laboratory Equipments » Rocker Gel Shaker
Rocker Gel Shaker "altis"
Having variable speed of 10 to 50 rpm
and angle tilt of 20C to 60C the unit is fitted with D.C. Driven motor. With
variable speed and timer.
Size
a) 12" x 12" :
b) 18" x 18" :
c) 24" x 24" :
d) 36" x 36" :
(B) - do- but fitted with digital RPM/SPEED METER :
Wrist Action Shaking Machine "altis"
It has a heavy cast iron base with
rugged construction and two side arms for holding flasks. Fitted with a
F.H.P. Heavy duty motor with variable speed. Can hold flasks from 100 to
1000 ml. capacity supplied with cord and plug to work on 220/230 volts A.C.
supply.
 |
| a) To hold 4 flasks |
| b) To hold 4 flasks and top platform to hold 4
flask |
| c) To hold 8 flasks |
| d) To hold 8 flasks and top platform to hold
flask |
|
|
Optional Accessories
Automatic 0-60 minute "GERMAN TIMER"
Kahn (Reciprocating) Shaking Machine"altis"
Kahn racks, bottles or flasks of
different size can be shaken by adjusting the compartments provided on the
shaking rack. The rate of motion can be adjusted mechanically by belt
tension from 140 to 350 R.P.M. APPROXIMATELY. To work on 220/230 volts A.C.
supply.
Wagner's Shaking Machine "altis"
For estimation of phosphoric acid in
stages and raw phosphates suitable in citrate solutions. The shaking frame
is mounted on spindle with pulley for power drive and spindle is supported
on bearing on heavy metal upright base plate. Bottle and flasks of various
size from 500 ml to 1 liter can be accommodate. Fitted with ¼ HP Motor
to work on 220 volts single phase and speed to 60 to 70 RPM with cord and
plug.
|
| a) To accommodate 6 bottles in 2
rows |
| b) To accommodate 12 bottles n 2 rows |
|
|
Optional Accessories
Timer 0-60 Minutes German
Rotary Flask Shaker "altis"
Designed for continues shaking of
solutions in Erlenmeyer Flasks from 50 ml 1000 ml capacity. It is a compact
beach type table top model with platform fitted with rubber discs mounted on
ball bearing crack shafts to give an orbital motion to the flasks, within a
diameter of approximately 2". The motor is coupled by means of a V-belt
with pitch pulley, and is mounted on a heavy and sturdy angle iron frame.
Speed is controlled by mechanical speed controller. To work on 220/230 volts
A.C. supply.
|
| Platform Size |
Motor Capacity |
Holding Capacity |
| a) 30 x 30 cm |
0.25 HP |
9 flasks / 250 ml |
| b) 45 x 45 cm |
0.25 HP |
16 flasks/ 250 ml |
| c) 45 x 45 cm |
0.25 HP |
25 flasks/ 100 ml |
| d) 45 x 45 cm |
0.25 HP |
9 flasks/ 500 ml |
| e) 55 x 55 cm |
0.25 HP |
36 flasks/ 100 ml |
| f) 55 x 55 cm |
0.25 HP |
25 flasks/ 250 ml |
| g) 55 x 55 cm |
0.25 HP |
16 flasks/ 500 ml |
| h) 65 x 65 cm |
0.50 HP |
36 flasks/ 250 ml |
| i) 65 x 65 cm |
0.50 HP |
25 flasks/ 500 ml |
| J) 105 x 105 cm |
1.0 HP |
81 flasks/ 250 ml |
| k)105 x 105 cm |
1.0 HP |
64 flasks/ 500 ml |
| i) 105 x 105 cm |
0.25 HP |
49 flasks/ 1000 ml |
|
|
Orbital Shaking Incubator (Microprocessor Controlled) "altis"
Body made of thick stainless steel
sheet (SS-304 grade). Top lid is made up of transparent see through plexi
glass. A variable speed rotary shaker platform is fitted with IMPORTED DC
DRVEN MOTOR for continuous operation units are also fitted with
MICROPROCESSOR DIGITAL RPM/SPEED INDICATOR The shaking platform can
accommodate 16 flasks of 250/500 ml or 25flaks of 100ml or 36 flasks of
50ml, is provided at the base of incubator so as to shake erlynmeyer flasks.
The variable speed motor is fitted outside of the inner chamber at the base
. The complete unit is mounted on a sturdy angle iron frame. Temperature is
controlled by Microprocessor Based PID Digital Temperature
indicator-cum-controller from ambient to 700C ± 0.50C. The unit is
fitted with air circulation fan for temperature uniformity. To work on
220/230 volts A.C. supply
Platform Size: 550 x 550 mm (Cap. 200 ltrs.)
Optional Accessories
(a) Spare set of lotus clamps of 50ml , 100 ml, 250
ml, 500 ml.
